
APS Sub 10
The APS Sub 10 is one of our personal favourite subwoofers. It brings great depth and detail to the low end, and pairs very well with virtually any monitor speakers. If you work on music that requires more low end detail whether it is dance, orchestral or pop, this sub will do wonders for your monitor setup.
Order Time: 2 - 3 Weeks
Custom Colours: 3 - 4 Weeks
Contact us in advance for confirmation of custom finishes. Displayed in White Custom Finish.
Technical specifications
Subwoofer
Type | Active – Class D power amplifier Hypex: 400 W @ 4Ω |
Dimensions | Height x Width x Depth 39 cm x 39 cm x 40 cm / 15.35" x 15.35" x 15.75" |
Free Field Frequency Response | ±2.5 dB: 19-90 Hz |
SPL in Free Field @ 1m | RMS: 108 dB (single subwoofer) Peak: 116 dB (pair of subwoofers) |
Weight | 24 kg / 53 lbs |
Calibrated Controls
Input Sensitivity Switch / VOLUME (8 positions) | -4.5dB, -3dB, -1.5dB, 0dB, 1.5dB, 3dB, 4.5dB, 6dB |
Input Sensitivity Switch / VOLUME (3 positions) | -20dB, -10dB, 0dB |
Low-pass filter Switch CUT OFF | 40Hz, 45Hz, 50Hz, 57Hz, 63Hz, 71Hz, 80Hz, 90Hz |
Filters By-Pass Switch UNFILTERED (LFE) | Position down: filters ON Position up: filters OFF |
PHASE Switch | 0 degrees, 180 degrees |
STAND-BY Switch | Position down: active STAND-BY Position up: continuous mode (Stand-by OFF) |
Loudspeaker
Subbass Loudspeaker | Ø 29 cm Diaphragm: cellulose, surround: rubber |
Amplifiers
Subbass Loudspeaker Power Amplifier | 400 W RMS @ 4 Ω (270 W RMS @ 6 Ω) |
THD distortions | Typ 0.01%, Max 0.05% 20Hz<f<20kHz, Pout < PR/2 Max 0.04% 20Hz<f<20kHz, Pout = 1W |
Inputs, Outputs
INPUT right (R) and left (L) | Two types (common socket Combo): - XLR symmetrical (balanced) - TRS symmetrical (balanced) "6.3 mm" and RCA nonsymmetrical Input impedance 10 kΩ |
„Loop Through” Output | XLR symmetrical, Output impedance 100 Ω |
Protections
Subbass Loudspeaker Protection | Pop-free start and stop control |
Power Amplifiers Protections | Overcurrent protection |
Power Amplifiers Protections | Overvoltage protection |
Signaling Devices
STAND-BY ON | Orange LED |
CLIPPING detected | Red LED |
POWER ON / DC-error detected | Green LED / Red LED |
We Also Recommend